Flow Mang Semi-Automatic Welding Wire

Flow Mang Semi-Automatic wire is a 21% alloy of manganese, nickel, chromium, silicon and carbon, and is recommended for the build-up and repair of manganese steel parts, crusher rolls, hammers, dredge parts, shovel lips and teeth, attachment and joining of Mangalloy bars and plates, and general manganese strength welds. It provides excellent wear resistance when work-hardened in severe impact service

• Use A.C. or D.C. reverse polarity – D.C. preferred
• Recommended heat:
  7/64” diameter wire
  225-275 Amperes
  28-32 voltage
• Unlimited passes
• Available in 50 lb. Coils.

Typical physical properties:

• Yield Strength = 78,000 psi
• Tensile strength = 109,000 psi
• Elongation = 20%
• Brinell hardness as deposited = 180
• Work hardens to 550