find your worldwide distributor

Products

Information

Warranty

Ford Steel Company warrants its products against defective material, which will either be replaced or credited to the customer’s account after an investigation by the St. Louis office. We are not responsible for incidental or consequential damages.

wearaly.gif (2095 bytes) Plate

Click for Applications

Click for Chemical Analysis/Physical Properties/Stock Sizes

Mangalloy Steel is an 11-14% manganese steel that performs best in extreme impact applications. Under shock and impact it nearly triples its initial surface hardness, retains its interior toughness, and acquires a high polish. These features, combined with Mangalloy's high tensile strength, make it an ideal material for heavy impact and abrasive service. Mangalloy steel is also non-magnetic.

Cutting:
Recommended using plasma or laser, but can be flame cut with oxygen acetylene.

Forming:
Cold bending and cold roll forming can be performed.

Machining:
Due to Mangalloys' work hardening feature, special tooling such as carbide tipped or high speed cobalt tools are required.

Welding:
Use Flow-Mang welding electrodes when welding manganese to manganese.

                                  click image below to view full-sized image
 
   

WWW.FORDSTEEL.COM
PO Box 54 | 2475 Rock Island Blvd. | St. Louis, Missouri 63043 U.S.A.
(314) 567-4680 | Toll-Free: (800) 325-4012 | Fax: (314) 567-5762
Branch Office & Warehouse
Elko, Nevada (775) 738-8883 | Toll-Free: (800) 939-3673 | Fax: (775) 738-0155
copyright © 2009     Ford Steel    all rights reserved
created by Design-Sight