Ford Steel Co: steel, heat-treated, abrasion resistant, impact resistant steel.

Products

Information

Warranty

Ford Steel Company warrants its products against defective material, which will either be replaced or credited to the customer’s account after an investigation by the St. Louis office. We are not responsible for incidental or consequential damages.

wearaly.gif (2095 bytes) Nickel Chrome Plate

Click for Applications

Click for Chemical Analysis and Physical Properties

Wearalloy Nickel Chrome Plate has a rich chemistry. It is a heat treated, quenched and tempered alloy steel plate. The steel is fully killed, vacuum de-gassed, fine grained and desulfurized. The addition of nickel and chrome provides improved toughness, increased hardenability and better corrosion resistance for shock and abrasion applications.

Welding:
For welding Wearalloy Nickel Chrome Plate, we recommend that low hydrogen electrodes be used: such as E-70XX E-80XX, E-90XX, E-100XX and E-110XX. Preheating is recommended on plates thicker than 1-1/2".

Drilling and Machining:
Wearalloy Nickel Chrome Plate is a free machining plate with standard carbide indexable drills and end mills. As the hardness level of the plate increases, it is necessary to decrease the cutting speed and feed depth.

Forming:
Wearalloy Nickel Chrome can be formed with or perpendicular to the cross grain of the plate. At sharper bends, it is recommended that forming should be performed with the axis of bend at right angles to the rolling direction or cross grain of the plate.

click image below to view full-sized image

WWW.FORDSTEEL.COM

PO Box 54 | 2475 Rock Island Blvd. | St. Louis, Missouri 63043 U.S.A.

(314) 567-4680 | Toll-Free: (800) 325-4012 | Fax: (314) 567-5762

click to e-mail us!

Branch Office & Warehouse

Elko, Nevada (775) 738-8883 | Toll-Free: (800) 939-3673 | Fax: (775) 738-0155

created by Design-Sight